Back
Next
ABC-AUTOSPORT-BEARINGS-COMPONENTS-LTD-LOCTITE-group-3-300x300
ABC-AUTOSPORT-BEARINGS-COMPONENTS-LTD-LOCTITE-group-3-300x300
Manufacturer > Loctite

LOCTITE 329/315ML – Structural Bonding – Acrylics

Part Number: LOCTITE 329/315ML
Race Category
ALL
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 329/315ml – Structural Bonding – Acrylics

Loctite AA 329 structural bonding – fast fixture

Loctite AA 329 is suitable for bonding structural or sheet steel where continuous or repeated loading is encountered, e.g. metal furniture, containers and doors. The product cures at room temperature with the aid of Activator 737 or 7386.

Product Description

Technology: Acrylic
Chemical Type: Modified methacrylate ester
Appearance (uncured): Straw yellow to brown liquid
Components: One component – requires no mixing
Viscosity: Medium
Cure: Room temperature with activator
Application: Bonding

Typical Properties of Uncured Material
Specific Gravity @ 25°C: 1.02
Viscosity, Brookfield – RVT, 25°C, mPa·s (cP):
–Spindle 6, speed 20 rpm: 15,000 to 38,000

Typical Curing Performance

Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The graph shown in the data sheet shows the shear strength developed with time on grit blasted steel lap shears compared to different materials and tested according to ISO 4587. (Activator 737 applied to one surface).

Cure Speed vs. Bond Gap
The rate of cure will depend on the bondline gap. The graph shown in the data sheet shows the shear strength developed with time on grit blasted steel lap shears at different controlled gaps and tested according to ISO 4587. (Activator 737 applied to one surface).

Typical Performance of Cured Material

Cured for 24 hours @ 22°C, Activator 737 or 7386 on 1 side.
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² ≥15 (psi) (≥2,900)

Tensile Strength, ISO 6922:
Steel pin (grit blasted): N/mm² 26 (psi) (3,770)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£43.74Each (exc VAT)

In Stock