Back
Next
LOCTITE-3421-50ML-ABC
LOCTITE-3421-50ML-ABC
Manufacturer > Loctite

LOCTITE 3421/50ML – Structural Bonding 2K Epoxy

Part Number: LOCTITE 3421/50ML
Race Category
All Products
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 3421/50ml – Structural Bonding 2k Epoxy

Loctite EA 3421 structural bonding – 2K Epoxy, general purpose, long open time.

Loctite EA 3421 is a two component epoxy adhesive which cures slowly at room temperature after mixing. It is a general purpose, flowable adhesive which develops high strength and has excellent moisture resistance. The long working life and medium viscosity make this adhesive system suitable for large surfaces and where adjustment time is needed after assembly.

Product Description

Technology: Epoxy
Chemical Type: Epoxy
Appearance (Resin): White to off-white paste
Appearance (Hardener): Amber, Clear liquid
Appearance (Mixture): Clear amber-yellow
Components: Two part – Resin & Hardener
Viscosity: Medium
Mix Ratio, by volume – Resin : Hardener: 1 : 1
Mix Ratio, by weight – Resin : Hardener: 100 : 90
Cure: Room temperature cure after mixing
Application: Bonding
Specific Benefit: Excellent on surfaces made from metal, ceramic, wood, glass or rigid plastics

Typical Properties of Uncured Material
Specific Gravity @ 25°C: 1.12 to 1.18
Viscosity, Brookfield – RVT, 25°C, mPa·s (cP):
–Spindle 6, speed 2.5 rpm: 30,000 to 90,000
–Spindle 6, speed 5 rpm: 60,000 to 100,000

Typical Performance of Cured Material

Cured for 7 days @ 22°C
Lap Shear Strength , ISO 4587:
Steel (grit blasted): N/mm² 20 to 25 (psi) (2,900 to 3,600)

Stainless steel (grit blasted) N/mm² 9 to 12 (psi) (1,300 to 1,740)

Zinc dichromate: N/mm² 7 to 12 (psi) (1,000 to 1,700)

Aluminum (abraded): N/mm² 8 to 12 (psi) (1,200 to 1,700)

Aluminum (etched): N/mm² 12 to 16 (psi) (1,700 to 2,300)

Galvanized Steel (HD): N/mm² 9.4 (psi) (1,400)

Brass: N/mm² 8 to 11 (psi) (1,200 to 1,600)

Glass-reinforced plastic (GRP): N/mm² 0.5 to 2 (psi) (70 to 290)

Phenolic: N/mm² 2.5 to 4.5 (psi) (360 to 650)

ABS: N/mm² 0.5 to 1 (psi) (70 to 150)

Hardwood (Mahogany): N/mm² 6 to 15 (psi) (870 to 2,200)

Softwood (Red Deal): N/mm² 8 to 10 (psi) (1,200 to 1,500)

Polycarbonate: N/mm² 2.5 to 4 (psi) (360 to 580)

Tensile Strength , ISO 6922:
Mild steel pin (grit blasted) to Soda glass: N/mm² 13 to 18 (psi) (1,900 to 2,600)

180° Peel Strength, ISO 8510-2:
Steel (grit blasted): N/mm 2 to 3 (lb/in) (11 to 17)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£9.32Each (exc VAT)

In Stock