Back
Next
LOCTITE-3425-50ML-ABC
LOCTITE-3425-50ML-ABC
Manufacturer > Loctite

LOCTITE 3425/50ML – Structural Bonding 2K Epoxy

Part Number: LOCTITE 3425/50ML
Race Category
All Products
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 3425/50ml – Structural Bonding 2k Epoxy

Loctite EA 3425 structural bonding – 2K Epoxy, multiple purpose bonder, excellent for bonding metals, for large surfaces.

Loctite EA 3425 is a two component, high viscosity, thixotropic epoxy adhesive which cures at room temperature after mixing. It is a general purpose, non sag adhesive which develops high strength on a wide range of substrates. The thixotropic properties enable this adhesive system to bond rough vertical surfaces made from metal, ceramic, rigid plastics or wood through gaps of up to 3 mm.

Product Description

Technology: Epoxy
Chemical Type: Epoxy
Appearance (Resin): Light beige paste
Appearance (Hardener): Light beige paste
Appearance (Mixture): Yellow / white paste
Components: Two part – Resin & Hardener
Viscosity: Thixotropic
Mix Ratio, by volume – Resin : Hardener: 1 : 1
Mix Ratio, by weight – Resin : Hardener: 100 : 100
Cure: Room temperature cure after mixing
Application: Bonding
Key Substrates: Metals , Ceramics, Rigid plastics and Wood

Typical Properties of Uncured Material
Specific Gravity @ 25°C: 1.34 to 1.4
Viscosity, Brookfield – RVT, 25°C, mPa·s (cP):
–Spindle 7, speed 5 rpm: 1,500,000 to 3,500,000
Viscosity @ 25°C, mPa·s (cP):
–Cone and Plate Rheometer: 4,000 to 8,000

Typical Performance of Cured Material

Cured for 7 days @ 22°C, tested at 22°C.
Lap Shear Strength ISO 4587:
Steel (grit blasted): N/mm² 25 to 30 (psi) (3,500 to 4,400)

Stainless steel (grit blasted): N/mm² 10 to 12.5 (psi) (1,500 to 1,800)

Aluminum (abraded): N/mm² 7 to 13 (psi) (1,000 to 1,900)

Aluminum (etched): N/mm² 18 to 22 (psi) (2,600 to 3,200)

Galvanized Steel (HD): N/mm² 11 to 16 (psi) (1,600 to 2,300)

Zinc dichromate: N/mm² 12 to 15 (psi) (1,700 to 2,200)

Brass: N/mm² 9 to 15 (psi) (1,300 to 2,200)

GRP (smooth skim side): N/mm² 0.6 to 1.2 (psi) (90 to 170)

Phenolic: N/mm² 2.5 to 3.5 (psi) (360 to 510)

ABS: N/mm² 0.4 to 0.5 (psi) (60 to 70)

Polycarbonate: N/mm² 2 to 4 (psi) (290 to 580)

Hardwood (Mahogany): N/mm² 8 to 14 (psi) (1,200 to 2,000)

Softwood (Red Deal): N/mm² 8 to 10 (psi) (1,200 to 1,500)

180° Peel Strength, ISO 8510-2:
Mild Steel (grit blasted): N/mm 1.5 to 2.5 (lb/in) (9 to 15)

Impact Resistance , ISO 9653:
Mild Steel Blocks (grit blasted): kJ/m² 15.5 (ft-lbs/in²) (7.4)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£10.33Each (exc VAT)

Out Of Stock