Back
Next
LOCTITE-3450-25ML-ABC
LOCTITE-3450-25ML-ABC
Manufacturer > Loctite

LOCTITE 3450/25ML – Structural Bonding Steel Filled

Part Number: LOCTITE 3450/25ML
Race Category
All Products
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 3450/25ml – Structural Bonding Steel Filled

Loctite 3463 is a versatile, dual component, easy to use, steel-filled epoxy repair putty. It is applied like a putty and when cured it exhibits high compressive strength and good adhesion to most surfaces. This product stops leaks in pipes and tanks, fills oversized bolt holes, smoothes welds, and repairs non-structural defects in castings or holes in tanks. This product is typically used in applications with an operating temperature range of -30.

Loctite EA 3450 is a two component epoxy adhesive which cures rapidly at room temperature after mixing. It is a metal bonding adhesive which develops high strength. The gap filling properties make this adhesive system suitable for rough and poorly fitting surfaces made from metal, ceramic, rigid plastics or wood. Applications include bonding aluminum window frames and GRP panels.

Product Description

Technology: Epoxy
Chemical Type (Resin): Epoxy
Chemical Type (Hardener): Epoxy
Appearance (Resin): Black thixotropic paste
Appearance (Hardener): White thick paste
Appearance (Mixture): Metallic gray
Components: Two component – requires mixing
Mix Ratio, by volume – Resin : Hardener: 1 : 1
Mix Ratio, by weight – Resin : Hardener: 1 : 1
Cure: Room temperature cure after mixing
Application: Bonding

Typical Properties of Uncured Material
Specific Gravity @ 25°C: 1.7
Casson Viscosity @ 25°C Pa∙s Plate-plate: 25

Typical Performance of Cured Material

Lap Shear Strength, :
Mild steel: N/mm² 21 (psi) (3,070)

Grit Blasted Mild Steel (GBMS): N/mm² 25 (psi) (3,560)

Aluminum: N/mm² 11 (psi) (1,650)

Aluminum (Gritblasted): N/mm² 21 (psi) (3,050)

Polycarbonate: N/mm² 5 (psi) (740)

PVC: N/mm² 2 (psi) (290)

Nylon: N/mm² 3 (psi) (440)

ABS: N/mm² 2 (psi) (280)

Wood (Beech): N/mm² 11 (psi) (1,610)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£11.53Each (exc VAT)

In Stock