Loctite 3463/114g – Metal-Filled Compounds 2k Epoxy
Loctite 3463 is a versatile, dual component, easy to use, steel filled epoxy repair putty. It is applied like a putty and when cured it has a high compressive strength and good adhesion to most surfaces. This product stops leaks in pipes and tanks, fills oversized bolt holes, smoothes welds, and repairs non-structural defects in castings holes in tanks. This product is typically used in applications with an operating range of -30°C to +121°C.
Chemical Type (Resin): Epoxy
Chemical Type (Hardener): Epoxy
Appearance (Resin): Black thixotropic paste
Appearance (Hardener): White thick paste
Appearance (Mixture): Metallic gray
Components: Two component – requires mixing
Mix Ratio, by volume – Resin : Hardener: 1 : 1
Mix Ratio, by weight – Resin : Hardener: 1 : 1
Cure: Room temperature cure after mixing
Typical Performance of Cured Material
Cured for 1 hour @ 25 °C
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² ≥3.45 (psi) (≥500)
Aluminum (acid etched):
0.125 mm gap N/mm² 4.8 (psi) (700)
Compressive Shear Strength, ISO 10123:
Steel pins and collars: N/mm² 83 (psi) (12,000)
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.
Optimal Storage: 8°C to 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties.
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
Not sure if this product is right for you?
If you are not sure if this battery is right for your requirements, please contact our friendly sales team and they will be able to help you.
£12.20Each (exc VAT)