LOCTITE 382/20G – Adhesive Gel for General Purpose

Loctite 382/20g – Adhesive Gel For General Purpose

Loctite 382 Instant Adhesive – General purpose, gel

Loctite 382 is a single part, fast curing high viscosity cyanoacrylate adhesive formulated for electronics applications. Loctite 382 is designed to use with Tak Pak Accelerators to attain instant cures for tacking electronics components . Typical applications include wire tacking to coil forms; tamper proofing adjustable components; mounting standoffs, edge guides and stiffeners to circuit boards.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Water white to slightly cloudy gel
Components: One part – requires no mixing
Viscosity: High
Cure: Humidity
Application: Bonding
Key Substrates: Rubbers, Plastics and Metals

Typical Curing Performance
Under normal conditions, the atmospheric moisture initiates the curing process. Although full functional strength is developed in a relatively short time, curing continues for at least 24 hours before full chemical/solvent resistance is developed.

Typical Properties of Uncured Material

Specific Gravity @ 25°C: 1.05
Viscosity, Brookfield – RVT, 25°C, mPa·s (cP):
Spindle TC, speed 20 rpm, , Helipath: 4,000 to 8,000

Typical Performance of Cured Material

Cured for 30 seconds @ 22°C
Tensile Strength, ISO 6922:
Buna-N: N/mm² ≥7.0 (psi) (≥1,015)

Cured for 2 minutes @ 22°C, 0.05 mm gap
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² ≥5.2 (psi) (≥754)

Cured for 24 hours @ 22°C
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² 18 to 26 (psi) (2,610 to 3,770)

Aluminum (etched): N/mm² 11 to 19 (psi) (1,595 to 2,755)

ABS: N/mm² >6 (psi) (>870)

PVC: N/mm² >6 (psi) (>870)

Polycarbonate: N/mm² >5 (psi) (>725)

Phenolic: N/mm² 5 to 15 (psi) (725 to 2,175)

Neoprene: N/mm² >10 (psi) (>1,450)

Nitrile: N/mm² >10 (psi) (>1,450)

Tensile Strength, ISO 6922:
Steel (grit blasted): N/mm² 12 to 25 (psi) (1,740 to 3,625)

Cured for 24 hours @ 22°C, followed by 24 hours @ 121°C, tested @ 121°C
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² ≥8.3 (psi) (≥1,203)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.