Back
Next
ABC-AUTOSPORT-BEARINGS-&-COMPONENTS-LTD-Loctite-401-20g
ABC-AUTOSPORT-BEARINGS-&-COMPONENTS-LTD-Loctite-401-20g
Manufacturer > Loctite

LOCTITE 401/20G – Instant Universal Adhesive

Part Number: LOCTITE 401/20G

£28.81Each (exc VAT)

In Stock

Race Category
All Products
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 401/20g – Instant Universal Adhesive

Loctite 401 is an instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Transparent, colorless to straw colored liquid
Components: One part – requires no mixing
Viscosity: Low
Cure: Humidity
Application: Bonding
Key Substrates: Metals , Plastics and Elastomers

Typical Properties of Uncured Material

Specific Gravity @ 25°C: 1.1
Viscosity, Cone & Plate, mPa·s (cP):
Temperature: 25°C, Shear Rate: 3,000: 70 to 110
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
Spindle 1, speed 30 rpm: 100 to 120

Typical Performance of Cured Material

Cured for 10 seconds @ 22°C
Tensile Strength, ISO 6922:
Buna-N: N/mm² ≥6.9 (psi) (≥1,000)

Cured for 72 hours @ 22°C
Tensile Strength, ISO 6922:
Buna-N: N/mm² 13.7 (psi) (1,900)

Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² 20 (psi) (2,900)

Aluminum (etched): N/mm² 12.4 (psi) (1,800)

Zinc dichromate: N/mm² 2.5 (psi) (360)

ABS: N/mm² 7.5 (psi) (1,090)

PVC: N/mm² 10 (psi) (1,450)

Phenolic: N/mm² 12.6 (psi) (1,820)

Polycarbonate: N/mm² 9.6 (psi) (1,400)

Nitrile: N/mm² 1.2 (psi) (170)

Neoprene: N/mm² 1.1 (psi) (160)

Block Shear Strength, ISO 13445:
Polycarbonate: N/mm² 11 (psi) (1,600)

ABS: N/mm² 23 (psi) (3,340)

PVC: N/mm² 2.6 (psi) (380)

Phenolic: N/mm² 21.3 (psi) (3,090)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£28.81Each (exc VAT)

In Stock