Back
Next
LOCTITE-403-50G-ABC
LOCTITE-403-50G-ABC
Manufacturer > Loctite

LOCTITE 403/50G – High Viscosity Low Bloom Low Odour

Part Number: LOCTITE 403/50G
Race Category
ALL
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 403/50g – High Viscosity Low Bloom Low Odour

Loctite 403 has low odor and low blooming properties and is particularly suitable for applications where vapor control is difficult. The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. Loctite 403 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Transparent, colorless to straw colored liquid
Components: One part – requires no mixing
Viscosity: Low
Cure: Humidity
Application: Bonding
Key Substrates: Metals , Plastics and Elastomers

Typical Properties of Uncured Material

Specific Gravity @ 25°C 1.1
Viscosity, Cone & Plate, mPa·s (cP):
–Temperature: 25°C, Shear Rate: 100: 900 to 1,500
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
–Spindle 2, speed 12 rpm, 1,100 to 1,650120

Typical Performance of Cured Material

Cured for 10 seconds @ 22°C
Tensile Strength, ISO 6922:
Buna-N: N/mm² ≥4.5 (psi) (≥652)

Cured for 24 hours @ 22°C
Tensile Strength, ISO 6922:
Steel pin to steel pin: N/mm² 30 (psi) (4,340)

Cured for 72 hours @ 22°C
Shear Strength
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² 20.3 (psi) (2,940)

Aluminum (etched): N/mm² 14.1 (psi) (2,050)

Zinc dichromate: N/mm² 2.2(psi) (320)

ABS: N/mm² 8.6(psi) (1,250)

PVC: N/mm² 2.7 (psi) (400)

Phenolic: N/mm² 1.3 (psi) (195)

Polycarbonate: N/mm² 6 (psi) (870)

Nitrile: N/mm² 0.5 (psi) (75)

Neoprene: N/mm² 0.7 (psi) (100)

Block Shear Strength, ISO 13445:
Polycarbonate: N/mm² 16.1 (psi) (2,340)
PVC: N/mm² 2.2 (psi) (320)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£45.65Each (exc VAT)

In Stock