Back
Next
LOCTITE-406-20G-ABC
LOCTITE-406-20G-ABC
Manufacturer > Loctite

LOCTITE 406/20G – Instant Adhesive for Plastics & Rubber

Part Number: LOCTITE 406/20G
Race Category
All Products
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 406/20g – Instant Adhesive For Plastics & Rubber

Loctite 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with Loctite primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Transparent, colorless to straw colored liquid
Components: One part – requires no mixing
Viscosity: Low
Cure: Humidity
Application: Bonding
Key Substrates: Metals, Plastics and Elastomers

Typical Properties of Uncured Material

Specific Gravity @ 25°C 1.1
Viscosity, Cone & Plate, mPa·s (cP):
–Temperature: 25°C, Shear Rate: 3,000: 12 to 22
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
–Spindle 1, speed 30 rpm: 15 to 25

Typical Performance of Cured Material

After 24 hours @ 22°C
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² 15.5 (psi) (2,250)

Aluminum (etched): N/mm² 12 (psi) (1,740)

Zinc dichromate: N/mm² 14 (psi) (2,030)

ABS: N/mm² 8.8 (psi) (1,280)

PVC: N/mm² 8.7 (psi) (1,260)

Polycarbonate: N/mm² 9.1 (psi) (1,320)

Phenolic: N/mm² 11.3 (psi) (1,640)

Neoprene: N/mm² 1 (psi) (150)

Nitrile: N/mm² 1.2 (psi)

Block Shear Strength, ISO 13445:
Polycarbonate: N/mm² 13.1 (psi) (1,900)

ABS: N/mm² 23.7 (psi) (3,440)

PVC: N/mm² 1.8 (psi) (260)

Phenolic: N/mm² 13.8 (psi) (2,000)

Tensile Strength, ISO 6922:
Buna-N: N/mm² 13 (psi) (1,890)

After 10 seconds @ 22°C
Tensile Strength, ISO 6922:
Buna-N: N/mm² ≥6.9 (psi) (≥1,000)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£17.37Each (exc VAT)

In Stock