Manufacturer > Loctite

LOCTITE 4062/20G – Instant Adhesive for Plastics & Rubber

Part Number: LOCTITE 4062/20G

£18.60Each (exc VAT)

Out Of Stock

Race Category
All Products
Product Category
Adhesives & Abrasives

Loctite 4062/20G – Instant Adhesive For Plastics & Rubber

Loctite 4062 Instant Adhesive – Plastics & rubber, capillary

Loctite 4062 is designed for bonding of plastics and elastomeric materials where very fast fixturing is required. The low viscosity is particularly suitable for bonding applications where controlled penetration of adhesive is required.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Transparent, colorless to straw colored liquid
Components: One part – requires no mixing
Viscosity: Very low
Cure: Humidity
Application: Bonding
Key Substrates: Plastics and Rubbers

Typical Properties of Uncured Material

Specific Gravity @ 25°C 1.05
Viscosity, Cone & Plate, mPa·s (cP):
–Temperature: 25°C, Shear Rate: 3,000: 1 to 4
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
–Spindle 1, speed 30 rpm 1 to 3

Typical Performance of Cured Material

After 24 hours @ 22°C
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² 12 to 20 (psi) (1,740 to 2,900)

Aluminum (grit blasted): N/mm² 11 to 15 (psi) (1,595 to 2,175)

Zinc Dichromate: N/mm² 3 to 8 (psi) (435 to 1,160)

ABS: N/mm² 6 to 8 (psi) (870 to 1,160)

PVC: N/mm² 6 to 8 (psi) (870 to 1,160)

Polycarbonate: N/mm² 8 to 12 (psi) (1,160 to 1,740)

Phenolic: N/mm² 6 to 12 (psi) (870 to 1,740)

Tensile Strength, ISO 6922:
Steel (grit blasted): N/mm² 10 to 20 (psi) (1,450 to 2,900)

Buna-N: N/mm² 5 to 11 (psi) (725 to 1,595)

After 10 seconds @ 22°C
Tensile Strength, ISO 6922:
Buna-N: N/mm² ≥6.90 (psi) (≥1,000)

Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£18.60Each (exc VAT)

Out Of Stock