Back
Next
LOCTITE-407-20G-ABC
LOCTITE-407-20G-ABC
Manufacturer > Loctite

LOCTITE 407/50G – High Temp Instant Adhesive

Part Number: LOCTITE 407/50G
Race Category
All Products
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 407/50G – High Temp Instant Adhesive

Loctite 407 Instant Adhesive – High temperature, low viscosity.

Loctite 407 is a general purpose adhesive suitable for applications where heat resistance is required.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Transparent, colorless to straw colored liquid
Components: One part – requires no mixing
Viscosity: Low
Cure: Humidity
Application: Bonding
Key Substrates: Rubbers, Plastics and Metals

Typical Properties of Uncured Material

Specific Gravity @ 25°C 1.05
Viscosity, Cone & Plate, mPa·s (cP):
–Temperature: 25°C, Shear Rate: 3,000: 20 to 50
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
–Spindle 1, speed 30 rpm, 25 to 55

Typical Performance of Cured Material

Cured for 24 hours @ 22°C
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² 16 to 26 (psi) (2,320 to 3,770)

Aluminum: N/mm² 12 to 19 (psi) (1,740 to 2,755)

Zinc dichromate: N/mm² 6 to 13 (psi) (870 to 1,885)

ABS: N/mm² 6 to 20 (psi) (870 to 2,900)

PVC: N/mm² 6 to 20 (psi) (870 to 2,900)

Polycarbonate: N/mm² 5 to 20 (psi) (725 to 2,900)

Phenolic: N/mm² 5 to 15 (psi) (725 to 2,175)

Neoprene: N/mm² 5 to 15 (psi) (725 to 2,175)

Nitrile: N/mm² 5 to 15 (psi) (725 to 2,175)

Tensile Strength, ISO 6922:
Steel (grit blasted): N/mm² 12 to 25 (psi) (1,740 to 3,625)

Buna-N: N/mm² 5 to 15 (psi) (725 to 2,175)

“T” Peel Strength, ISO 11339:
Steel (degreased): N/mm ≤0.5 (lb/in) (≤2.8)
Cured for 24 hours @ 22 °C, followed by 48 hours @ 120°C, tested @ 22°C

Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² ≥8.0 (psi) (≥1,160)

Cured for 30 seconds @ 22°C
Tensile Strength, ISO 6922:
Buna-N: N/mm² ≥4.0 (psi) (≥580)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£44.27Each (exc VAT)

In Stock