LOCTITE 414/20G – Super Bonder Instant Adhesive

Loctite 414/20G – Super Bonder Instant Adhesive

Loctite 414 Instant Adhesive – General purpose, low viscosity.

Loctite 414 is a general purpose cyanoacrylate instant adhesive.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Transparent, colorless to straw colored liquid
Components: One part – requires no mixing
Viscosity: Low
Cure: Humidity
Application: Bonding
Key Substrates: Plastics, Rubbers and Metals

Typical Properties of Uncured Material

Specific Gravity @ 25°C: 1.05
Viscosity, Cone & Plate, mPa·s (cP):
–Temperature: 25°C, Shear Rate: 3,000: 70 to 110
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
–Spindle 1, speed 30 rpm: 100 to 150

Typical Performance of Cured Material

After 24 hours @ 22°C
Lap Shear Strength, ISO 4587:
Steel (grit blasted): N/mm² 18 to 26 (psi) (2,610 to 3,770)

Aluminum (etched): N/mm² 11 to 19 (psi) (1,595 to 2,755)

ABS: N/mm² >6 (psi) (>870)

PVC: N/mm² >4 (psi) (>580)

Polycarbonate: N/mm² >5 (psi) (>725)

Phenolic: N/mm² 5 to 15 (psi) (725 to 2,175)

Neoprene: N/mm² >10 (psi) (>1,450)

Nitrile: N/mm² >10 (psi) (>1,450)

Tensile Strength, ISO 6922:
Steel (grit blasted): N/mm² 12 to 25 (psi) (1,745 to 3,625)

After 10 seconds @ 22°C
Tensile Strength, ISO 6922:
Buna-N: N/mm² ≥6.0 (psi) (≥870)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.