Back
Next
ABC-AUTOSPORT-BEARINGS-&-COMPONENTS-LTD-loctite-424-20g
ABC-AUTOSPORT-BEARINGS-&-COMPONENTS-LTD-loctite-424-20g
Manufacturer > Loctite

LOCTITE 424/20G – Instant Adhesive for Plastics & Rubber

Part Number: LOCTITE 424/20G

£34.45Each (exc VAT)

Out Of Stock

Race Category
All Products
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 424/20g – Instant Adhesive For Plastics & Rubber

Loctite 424 Instant Adhesive – Plastics & rubber, low viscosity.

Loctite 424 provides enhanced performance on EPDM and other elastomers

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Clear liquid
Components: One part – requires no mixing
Viscosity: High
Cure: Humidity
Application: Bonding
Key Substrates: Rubbers, Plastics and Metals

Typical Properties of Uncured Material

Specific Gravity @ 25°C: 1.05
Viscosity, Cone & Plate, mPa·s (cP):
Temperature: 25°C, Shear Rate: 3,000: 70 to 110
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
–Spindle 1, speed 30 rpm: 95 to 125

Typical Performance of Cured Material

After 24 hours @ 22°C
Lap Shear Strength: ISO 4587
Steel (grit blasted): N/mm² 18 to 26 (psi) (2,610 to 3,770)

Aluminum (grit blasted): N/mm² 11 to 19 (psi) (1,595 to 2,755)

Zinc dichromate: N/mm² 6 to 14 (psi) (870 to 2,030)

ABS: N/mm² 6 to 20 (psi) (870 to 2,900)

PVC: N/mm² 6 to 20 (psi) (870 to 2,900)

Polycarbonate: N/mm² 5 to 20 (psi) (725 to 2,900)

Phenolic: N/mm² 5 to 15 (psi) (725 to 2,175)

Neoprene: N/mm² 5 to 15 (psi) (725 to 2,175)

Nitrile: N/mm² 5 to 15 (psi) (725 to 2,175)

Tensile Strength: ISO 6922
Steel (grit blasted): N/mm² 12 to 25 (psi) (1,740 to 3,625)

Buna-N: N/mm² 5 to 15 (psi) (725 to 2,175)

“T” Peel Strength: ISO 11339
Steel (degreased): N/mm 0.5 (lb/in) (2.8)

After 10 seconds @ 22°C
Tensile Strength: ISO 6922
Buna-N: N/mm² ≥6.9 (psi) (≥1,000)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£34.45Each (exc VAT)

Out Of Stock