Manufacturer > Loctite

LOCTITE 454/20G – Adhesive Gel for General Purpose

Part Number: LOCTITE 454/20G

£20.46Each (exc VAT)

In Stock

Race Category
All Products
Product Category
Adhesives & Abrasives

Loctite 454/20g – Adhesive Gel For General Purpose

Loctite 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength.

Loctite 454 is designed for the assembly of difficult to bond materials which require uniform stress distribution and strong tension and/or shear strength. The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency prevents adhesive flow even on vertical surfaces.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): ) Clear to slightly cloudy gel
Components: One part – requires no mixing
Viscosity: High, thixotropic
Cure: Humidity
Application: Bonding
Key Substrates: Metals, Plastics and Elastomers

Typical Properties of Uncured Material

Specific Gravity @ 25°C: 1.1
Casson Viscosity, 25°C, mPa·s (cP):
–Cone and Plate Rheometer: 150 to 450
Viscosity, Brookfield – RVT, 25°C, mPa·s (cP):
–Spindle TC, speed 2.5 rpm, , Helipath: 100,000 to 300,000
–Spindle TC, speed 20 rpm, Helipath: 18,000 to 40,000

Typical Performance of Cured Material

Cured for 30 seconds @ 22°C
Tensile Strength: ISO 6922
Buna-N: N/mm² ≥6.0 (psi) (≥870)

Cured for 72 hours @ 22°C
Tensile Strength: ISO 6922
Buna-N: N/mm² 15.1 (psi) (2,190)

Lap Shear Strength: ISO 4587
Steel (grit blasted): N/mm² 20.9 (psi) (3,030)

Aluminum (etched): N/mm² 17.1 (psi) (2,480)

Zinc dichromate: N/mm² 11.5 (psi) (1,670)

ABS: N/mm² 8.3 (psi) (1,200)

PVC: N/mm² 7.1 (psi) (1,030)

Phenolic: N/mm² 12.3 (psi) (1,780)

Polycarbonate: N/mm² 7.7 (psi) (1,120)

Nitrile: N/mm² 1.3 (psi) (190)

Neoprene: N/mm² 1.1 (psi) (160)

Block Shear Strength: ISO 13445
Polycarbonate: N/mm² 9.6 (psi) (1,390)

ABS: N/mm² 23.3 (psi) (3,380)

PVC: N/mm² 3.3 (psi) (480)

Phenolic: N/mm² 6.7 (psi) (970)

Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£20.46Each (exc VAT)

In Stock