Back
Next
ABC-AUTOSPORT-BEARINGS-&-COMPONENTS-LTD-loctite-460-20g
ABC-AUTOSPORT-BEARINGS-&-COMPONENTS-LTD-loctite-460-20g
Manufacturer > Loctite

LOCTITE 460/20G – Instant Unit Adhesive

Part Number: LOCTITE 460/20G
Race Category
All Products
Circuit
Karting
Offroad
Sprint
Product Category
Adhesives & Abrasives

Loctite 460/20g – Instant Unit Adhesive

Loctite 460 Instant Adhesive – Low bloom, low odour, low viscosity.

Loctite 460 has low odor and low blooming properties and is particularly suitable for applications where vapor control is difficult. The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers.

Product Description

Technology: Cyanoacrylate
Chemical Type: Alkoxyethyl cyanoacrylate
Appearance (uncured): Transparent, colorless to straw colored liquid
Components: One part – requires no mixing
Viscosity: Low
Cure: Humidity
Application: Bonding
Key Substrates: Metals, Plastics and Elastomers

Typical Properties of Uncured Material

Specific Gravity @ 25°C: 1.1
Viscosity, Cone & Plate, mPa·s (cP):
–Temperature: 25°C, Shear Rate: 3,000: 25 to 55
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
–Spindle 1, speed 30 rpm: 30 to 50

Typical Performance of Cured Material

Cured for 10 seconds @ 22°C
Tensile Strength: ISO 6922
Buna-N: N/mm² ≥4.5 (psi) (≥652)

Cured for 72 hours @ 22°C
Lap Shear Strength: ISO 4587
Steel (grit blasted): N/mm² 21 (psi) (3,060)

Aluminum (etched): N/mm² 18 (psi) (2,650)

Zinc dichromate: N/mm² 2.4 (psi) (350)

ABS: N/mm² 7.9 (psi) (1,150)

PVC: N/mm² 2.8 (psi) (410)

Phenolic: N/mm² 1.5 (psi) (220)

Polycarbonate: N/mm² 7.7 (psi) (1,120)

Nitrile: N/mm² 1.3 (psi) (190)

Neoprene: N/mm² 0.7 (psi) (95)

Block Shear Strength: ISO 13445
Polycarbonate: N/mm² 25 (psi) (2,650
PVC: N/mm² 2.6(psi) (380)

Cured for 24 hours @ 22°C
Tensile Strength: ISO 6922
Steel pin to steel pin: N/mm² 30 (psi) (4,330)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£19.96Each (exc VAT)

In Stock