LOCTITE 480/500G – Adhesive Peel Resistant

Loctite 480/20g – Adhesive Peel Resistant

Loctite 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength.

Loctite 480 is a rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock.

Product Description

Technology: Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured): Black liquid
Components: One part – requires no mixing
Viscosity: Low
Cure: Humidity
Application: Bonding
Key Substrates: Metals, Plastics and Rubbers

Typical Properties of Uncured Material

Specific Gravity @ 25°C: 1.05
Viscosity, Cone & Plate, mPa·s (cP):
–Temperature: 25°C, Shear Rate: 1,000: 100 to 200
Viscosity, Brookfield – LVF, 25°C, mPa·s (cP):
–Spindle 1, speed 6 rpm: 100 to 200

Typical Performance of Cured Material

Cured for 30 seconds @ 22°C
Tensile Strength: ISO 6922
Buna-N: N/mm² ≥1.8 (psi) (≥260)

Cured for 24 hours @ 22°C
Lap Shear Strength: ISO 4587
Steel (grit blasted): N/mm² 22 to 30 (psi) (3,200 to 4,400)

Aluminum (etched): N/mm² 14 to 22 (psi) (2,000 to 3,200)

Zinc dichromate: N/mm² 8 to 15 (psi) (1,200 to 2,200)

ABS: N/mm² 6 to 20 (psi) (870 to 2,900)

PVC: N/mm² 4 to 20 (psi) (580 to 2,900)

Phenolic: N/mm² 5 to 15 (psi) (730 to 2,200)

Polycarbonate: N/mm² 5 to 20 (psi) (730 to 2,900)

Nitrile: N/mm² 5 to 15 (psi) (730 to 2,200)

Neoprene: N/mm² 5 to 15 (psi) (730 to 2,200)

Tensile Strength: ISO 6922
Steel (grit blasted): N/mm² 12 to 25 (psi) (1,700 to 3,600)

Buna-N: N/mm² 5 to 15 (psi) (730 to 2,200)

Cured for 24 hours @ 22°C, followed by 48 hours @ 120°C, tested @ 22°C
Lap Shear Strength: ISO 4587
Steel (grit blasted): N/mm² ≥18.0 (psi) (≥2,610)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.