LOCTITE 515/50ML – Flange Sealent Rigid Parts Med Cure

Loctite 515/50ml – Flange Sealent Rigid Parts Med Cure

Loctite 515 for machined, rigid metal flanges – medium cure speed.

Loctite 515 cures when confined in the absence of air between close fitting metal surfaces. It seals close fitting joints between rigid metal faces and flanges and will flex with minor flange movements.

Product Description

Technology: Acrylic
Chemical Type: Methacrylate ester
Appearance (uncured): Opaque, dark purple
Fluorescence: Positive under UV light
Components One component – requires no mixing
Viscosity: High
Cure: Anaerobic
Application: Sealing

Typical Properties of Cured Material

Cured for 1 hour @ 22°C
Compressive Shear Strength: ISO 10123
Steel pins and collars: N/mm² ≥5.0 (psi) (≥725)

Cured for 24 hours @ 22°C
Compressive Shear Strength: ISO 10123
Steel pins and collars: N/mm² ≥5.0 (psi) (≥725)

Lap Shear Strength: ISO 4587
Steel (grit blasted): N/mm² 6.0 (psi) (870)
Tensile Strength, ISO 6922:
Steel (grit blasted): N/mm² 14 (psi) (2,030)

Cured for 24 hours @ 90°C, tested @ 22°C
Lap Shear Strength: ISO 4587
Steel (grit blasted): N/mm² ≥6.9 (psi) (≥1,000)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.