LOCTITE 635/250ML – High Strength Retainer Slow cure

Loctite 635/250ml – High Strength Retainer Slow Cure

High Strength Retainer Slow cure

Loctite 635 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.

Product Description

Technology: Acrylic
Chemical Type: Dimethacrylate ester
Appearance (uncured): Green opaque liquid
Fluorescence: Positive under UV light
Components: One component – requires no mixing
Viscosity: Medium
Cure: Anaerobic
Secondary Cure: Activator
Application: Retaining
Strength: High

Typical Performance of Cured Material
Cured for 30 minutes @ 22°C, Activator 7471 on 1 side
Compressive Shear Strength: ISO 10123
Steel pins and collars: N/mm² ≥13.8 (psi) (≥2,001)

Cured for 24 hours @ 22°C
Compressive Shear Strength: ISO 10123
Steel pins and collars: N/mm² ≥20 (psi) (≥2,900)

Cured for 1 hour @ 93°C, tested @ 22°C
Compressive Shear Strength: ISO 10123
Steel pins and collars: N/mm² ≥31 (psi) (≥4,495)

Cured for 1 hour @ 93°C, followed by 1 hour @ 149°C, tested @ 149°C
Compressive Shear Strength: ISO 10123
Steel pins and collars: N/mm² ≥9.6 (psi) (≥1,392)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.