LOCTITE 9461/50ML – Structural bonding

Loctite 9461/50ml – Structural Bonding

Loctite ea 9461 structural bonding – 2K Epoxy, toughened, gap filling.

Loctite ea 9461 is a thixotropic, two component epoxy adhesive formulated for ease of use as well for a good balance of properties. This adhesive couples high peel strength and excellent shear strength in a smooth, non-sag paste that is easily dispensed.

Product Description

Technology: Epoxy
Chemical Type (Resin): Epoxy
Chemical Type (Hardener): Amine
Appearance (Resin): White opaque paste
Appearance (Hardener): Black opaque paste
Appearance (Mixture): Gray paste
Components: Two part – Resin & Hardener
Viscosity: Thixotropic
Mix Ratio, by volume – Resin: Hardener: 1 : 1
Mix Ratio, by weight – Resin: Hardener: 100 : 100
Cure Room: temperature cure after mixing
Application: Bonding
Maximum Gap: 3.0 mm

Typical Performance of Cured Material
Cured for 7 days @ 22°C
Lap Shear Strength: ISO 4587
Mild steel (grit blasted): N/mm² 25 (psi) (3,600)

Aluminum (abraded) (Silicon Carbide Paper, A166 grit, P400A grade): N/mm² 21 (psi) (3,100)

Aluminum (etched in acidic ferric sulphate): N/mm² 21 (psi) (3,100)

Stainless steel: N/mm² 19 (psi) (2,800)

Galvanized Steel (Hot Dipped): N/mm² 16 (psi) (2,300)

Brass: N/mm² 11 (psi) (1,600)

Zinc dichromate: N/mm² 16 (psi) (2,300)

Polycarbonate: N/mm² 6.5 (psi) (940)

ABS: N/mm² 6.2 (psi) (900)

GRP (Polyester resin matrix): N/mm² 5 (psi) (720)

Glass Fiber Reinforced Epoxy: N/mm² 13 (psi) (1,900)

180° Peel Strength: ISO 8510-2
Mild Steel (grit blasted): N/mm 10 (lb/in) (57.1)

Storage
Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.