Manufacturer > Loctite

LOCTITE 9514/300ML – 1K Epoxy Structural Ad

Part Number: LOCTITE 9514/300ML

£55.64Each (exc VAT)

Out Of Stock

Race Category
All Products
Product Category
Adhesives & Abrasives

Loctite 9514/300ml – 1K Epoxy Structural Ad

Loctite ea 9514 is a toughened, 1K-Epoxy adhesive, suitable for gap filling and resistance to high operating temperatures. Ideal for applications requiring toughness such as filter and magnet bonding.

Product Description

Technology: Epoxy
Chemical Type: Epoxy
Cure: Heat cure
Appearance: Gray opaque paste
Components: One-component
Application: Bonding

Typical Performance of Cured Material
Cured for 30 minutes @ 150°C, tested at 22°C. (0.05mm bond gap).
Lap Shear Strength: ISO 4587
Mild Steel (grit blasted): N/mm² 45 (psi) (6,530)

Stainless Steel: N/mm² 32 (psi) (4,640)

Zinc dichromate: N/mm² 28 (psi) (4,060)

Aluminum (abraded) (Silicon Carbide Paper, A166 grit, P400A grade): N/mm² 40 (psi) (5,800)

Aluminum (etched in acidic ferric sulphate): N/mm² 40 (psi) (5,800)

Brass: N/mm² 25 (psi) (3,630)

Galvanized Steel (Hot Dipped): N/mm² 20 (psi) (2,900)

IZOD Impact Resistance: ISO 9653 J/m²:
Mild steel (grit blasted): 10

180° Rigid Peel Strength: ISO 11339
Mild steel (grit blasted): N/mm 9.5 (lb/in) (54)

Cured for 60 minutes @ 120°C
Lap Shear Strength: ISO 4587
GRP (Polyester resin matrix): N/mm² 6 (psi) (870)

Glass Fiber Reinforced Epoxy: N/mm² 24 (psi) (3,480)

Please store this product in the unopened container in a dry location.
Further storage information may be indicated on the product container labeling.

General information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.

Not sure if this product is right for you?
If you are not sure if this product is right for your requirements, please contact our friendly sales team and they will be able to help you.

£55.64Each (exc VAT)

Out Of Stock